The BNF Vortex 150 Pro (BNF Basic) from Blade is an FPV-capable drone designed for outdoor use by intermediate-level pilots. This high-speed flyer is powered by a Fusion F3 flight controller and features four V-Spec 1306-3100 kV motors with customized ESCs. The flight controller features integrated Betaflight software, so you can fine-tune flight
The BNF Vortex 150 Pro (BNF Basic) from Blade is an FPV-capable drone designed for outdoor use by intermediate-level pilots. This high-speed flyer is powered by a Fusion F3 flight controller and features four V-Spec 1306-3100 kV motors with customized ESCs. The flight controller features integrated Betaflight software, so you can fine-tune flight performance. The Vortex 150's onboard FPV system consists of a 600 TVL wide-angle CCD camera and video transmitter that broadcasts to compatible FPV headsets (sold separately). All components are housed within a light-but-durable 2mm-thick carbon fiber frame.
This is a Bind-and-Fly (BNF) bundle that comes with everything you need except a transmitter (radio controller), flight battery with charger, and optional FPV monitor and/or headset.
The Vortex 150 comes with an integrated flight controller, full-graphic OSD, and 40-channel video transmitter. Loose wiring is virtually nonexistent for a professional look that's easy to maintain.
Seven 32-Bit ARM Processors
The Vortex 150 features seven fully integrated 32-bit ARM processors. There's a dedicated ARM for the flight controller, another for the full-graphic OSD, another for the programmable LED board, and one for each of the four custom ESCs.
Built to survive serious crashes, the Vortex 150 can take a hit and keep on flying.
Fusion F3 with BetaFlight
The Fusion F3 flight controller is equipped with BetaFlight firmware, a 32-bit processor, and 8 kHz loop times for an intuitive control feel out of the box. Plus, the software is future-proof with supporting updates easily uploaded via USB.
Dynamic Power Control
The Dynamic Power Control function of the video transmitter lowers power automatically when the Vortex 150 is disarmed or ready for a race to start, so that interference from other racers is minimized.
Integrated 5.8G Hz Video Tx
The fully integrated video transmitter supports all standard FPV channels and power levels from sub -1 to greater than 600mW.
A TNR (NFC) antenna provides full support for the ImmersionRC Personal and Race Director's wand. The latter enables additional channels for events with special spectrum use permissions.
When placed in PitStick Mode, the Vortex 150 will power up with the video transmitter disabled, and will only start transmitting when instructed to by the R/C transmitter.
A set of eight 24-bit RGB LEDs is protected between the upper and lower frames on the tail end. Through a dedicated 32-bit ARM processor, users can program a favorite color, brake lights, or turn indicators.
Lost Model Alarm
The Vortex features a lost model beeper that will help you locate your drone if it gets lost.
Custom V-Spec Motors
The custom V-Spec 1306-3100 kV brushless outrunner motors feature a high-speed rating and spin 3-inch props for the punch to accelerate quickly.
Full Graphic Display with EzOSD
The full-graphic On Screen Display (OSD) provides in-flight updates of critical parameters. The EzOSD menu allows all options to be programmed in the field using the RC transmitter and a headset or monitor.
Tap to zoom
You need to login or create account
Save products on your wishlist to buy them later or share with your friends.